Rune Central

The Official Rune Quake Message Board
It is currently Thu Mar 28, 2024 4:02 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Can't Play Joequake online please help me
PostPosted: Sat Nov 19, 2005 12:16 pm 
Offline
User avatar

Joined: Tue Sep 20, 2005 12:47 pm
Posts: 61
Location: England
I've tried everything to get joequake gl to play runequake online but i can't connect!

i keep getting the same thing
trying
still trying
still tring
host error: cl_connect connection failed

i've tried adding -ip xxx xxx xxx xxx, no effect

i've tried switching off my firewall

i've tried proquake

Still won't work! FUCKIN COMPUTER!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Nov 19, 2005 12:54 pm 
Offline
quake.intertex.net
User avatar

Joined: Sat Nov 15, 2003 7:39 pm
Posts: 243
Location: Kansas City!
So, proquake wont work?

The -ip parameter, are you SURE its the current ip? This happens with DSL, each time you connect to your isp you may get a different address.
If you have a Linksys router/firewall, load up your browser and enter 192.168.1.1 in the adress bar, it will ask you for name/password (defaults are admin, admin) then after u connect to the router, look for a tab called STATUS usually on the right hand side.
Image
use that as the proper ip.

Hope this helps or else i'll just faint. :shock:

Um, also make sure you have the correct address to runequake?
connect quake.runequake.com
or
connect quake.shmack.net


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Nov 19, 2005 1:19 pm 
Offline
User avatar

Joined: Tue Sep 20, 2005 12:47 pm
Posts: 61
Location: England
Thank You so much spunk

it's workin now just a little bit slow with the ping and all but it works :D


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Nov 19, 2005 7:11 pm 
Offline
User avatar

Joined: Sun Oct 09, 2005 4:48 am
Posts: 392
Location: Hey look! Secret Message!!!!
type this in the command prompt (not quakes :P) to see the ip of your machine:
Code:
ipconfig

you'll probably have a class C IP address and mask. So the first 3 spots would be your network location and the last is your machine's.

_________________
If you see me online, say Hi :)


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Nov 19, 2005 10:35 pm 
Offline
User avatar

Joined: Mon Apr 18, 2005 1:30 pm
Posts: 114
Dang near everyone these days is behind a router using NAT, and therefore the ip that shows up in ipconfig etc is not your correct ip, you have to get it from your router as per rook's instructions :)


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Nov 20, 2005 1:39 am 
Offline
User avatar

Joined: Sun Oct 09, 2005 4:48 am
Posts: 392
Location: Hey look! Secret Message!!!!
or setup your router to accept packets from quake1. Or turn off your router :lol:

There are a number of choices

_________________
If you see me online, say Hi :)


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Nov 20, 2005 6:03 am 
Offline

Joined: Sun Mar 09, 2003 10:47 pm
Posts: 1612
Location: Ohio
yellow#5 wrote:
Dang near everyone these days is behind a router using NAT, and therefore the ip that shows up in ipconfig etc is not your correct ip, you have to get it from your router as per rook's instructions :)


Um? This is so strange because doing c:\quake\whateverquake.exe -ip xxx.xxx.xxx.xxx the IP must be the local ip, not the internet IP with an NAT router.

Image

So like in this example, I'd have to use c:\quake\whateverquake.exe -ip 192.168.1.100

The internet IP means nothing to your computer. Your computer does not even know your internet IP if you have an NAT router.

Is someone actually able to use c:\quake\whateverquake.exe -ip (insert internet ip) and it work who is using a router? This shouldn't be possible.

(By the way, JoeQuake and QRack have the same NAT fix that ProQuake has ... Joszef added the NAT fix to JoeQuake back in 2003. :D)


Last edited by Baker on Sun Nov 20, 2005 6:15 am, edited 1 time in total.

Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Nov 20, 2005 6:15 am 
Offline
User avatar

Joined: Tue Sep 20, 2005 12:47 pm
Posts: 61
Location: England
I have DSL and i use my internet ip because when i try to use my local one it won't connect. By the way everytime i restart my computer my internet ip changes the first number is always the same tho. "172.xxx.xxx.xxx"


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Nov 20, 2005 6:17 am 
Offline

Joined: Sun Mar 09, 2003 10:47 pm
Posts: 1612
Location: Ohio
Doesn't sound like an NAT router to me. I am pretty certain I know of at least 3 fixes to your problem.

The easiest will be forthcoming in 5 to minutes ;)

What version of Windows?


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Nov 20, 2005 6:25 am 
Offline

Joined: Sun Mar 09, 2003 10:47 pm
Posts: 1612
Location: Ohio
Image

Go to Network Connections. I am hoping this is Windows XP.

Start -> Control Panel -> Network Connections

How many icons do you have? In my screenshot above the number of network connection icons is 2.

If your setup is like most peoples, only one of these icons is your actual internet connection and it sounds like you have more than 1 enabled.

1. How many network icons, how many enabled?

2. If you are using a LAN, is your DSL connection plugged into your computer or your router?

3. If you do Start -> Click Run and type "command" and press Enter -> On the black DOS prompt, type "ipconfig".

You will get results like ...

Image

I assume you get more than the 3 lines of output that I got. How many sets of 3 does it show?


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Dec 27, 2005 10:42 am 
Offline
User avatar

Joined: Thu Mar 13, 2003 3:17 am
Posts: 105
You can always go to http://whatismyip.com

_________________
MagnesiuM

Slot for president!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Dec 27, 2005 3:35 pm 
Offline

Joined: Sun Mar 09, 2003 10:47 pm
Posts: 1612
Location: Ohio
But when using the -ip parameter with Quake it has to be your local IP address. When you are using an NAT router, the local ip address is never your internet ip address so that whatsmyip.com ip address isn't useful for much if you are using a router.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group