Rune Central

The Official Rune Quake Message Board
It is currently Thu Mar 28, 2024 4:19 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: SniperVision2.0: Never Use Default F11 Zoom_In Key, Use This
PostPosted: Sun Nov 02, 2003 8:08 pm 
Offline

Joined: Sun Mar 09, 2003 10:47 pm
Posts: 1612
Location: Ohio
The F11 Zoom_Key that is the default in Quake messes up your SENSITIVITY setting. Unless you are a keyboarder, you should never use F11.

Instead, if you want a zoom key ... use this bind:

Code:

ALIAS MY_SENSITIVITY "SENSITIVITY 15"  // Set the 15 to whatever you want
ALIAS MY_FOV "FOV 90" // Set the 90 to whatever you like, some ppl use 103 or 110


MY_FOV   // initializes your FOV
MY_SENSITIVITY // initializes your SENSITIVITY

// SNIPER VISION 2.0

echo " ... Sniper Vision 2.0"
// the following is a single line in your config
alias +snipe "fov 70.00 ;sensitivity 4.00 ;wait ;fov 58.00 ;sensitivity 3.25 ;wait ;fov 45.00 ;sensitivity 2.50 ;wait ;fov 32.00 ;sensitivity 1.74 ;wait ;fov 20.00 ;sensitivity 1.00"
// the following is ALSO a single line in your config
alias -snipe "fov 32.00 ;sensitivity 1.75 ;wait ;fov 45.00 ;sensitivity 2.50 ;wait ;fov 58.00 ;sensitivity 3.25 ;wait ;fov 70.00 ;sensitivity 4.00 ;wait ;my_fov ;my_sensitivity"


BIND F11 +snipe



I took an imperfect sniper bind and improved it long ago, finally last summer I perfected it. Doesn't mess up your FOV or SENSITIVITY.

_________________
quake.shmack.net:26000 = RQ, 26001 = Rocket Arena, 26002 = Vote-Anything
quake.ihoc.net, Rockets/jet/7 runes
quake.singed.net, RQ on E1M7
http://www.GameStatus.Net stats, http://www.GameAholic.Net Q1 servers


Top
 Profile  
Reply with quote  
 Post subject: Re: SniperVision2.0: Never Use Default F11 Zoom_In Key, Use This
PostPosted: Tue Dec 22, 2009 3:20 pm 
Offline

Joined: Fri Dec 18, 2009 7:05 pm
Posts: 2
Where do I include this code you posted to make it able to work?


Top
 Profile  
Reply with quote  
 Post subject: Re: SniperVision2.0: Never Use Default F11 Zoom_In Key, Use This
PostPosted: Wed Dec 23, 2009 3:15 am 
Offline

Joined: Sun Mar 09, 2003 10:47 pm
Posts: 1612
Location: Ohio
You can put it in c:\quake\id1\autoexec.cfg (if it doesn't exist open up notepad and paste the above code in it and then save it there).


Top
 Profile  
Reply with quote  
 Post subject: Re: SniperVision2.0: Never Use Default F11 Zoom_In Key, Use This
PostPosted: Wed Dec 23, 2009 2:49 pm 
Offline

Joined: Fri Dec 18, 2009 7:05 pm
Posts: 2
Thank you, baker :)


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group