Rune Central
http://forums.runecentral.com/

quake restarts on me and then i have to reboot HELP ME!!!!!
http://forums.runecentral.com/viewtopic.php?f=9&t=908
Page 1 of 1

Author:  gamefreak [ Sun Oct 02, 2005 1:16 pm ]
Post subject:  quake restarts on me and then i have to reboot HELP ME!!!!!

after i start playing quake for a couple min. it closes it self out.then when i click on it a warning message comes up that says this program had performed an illegal operation and will shut down.i then click details and it says this JOEQUAKE caused a general protection fault
in module PMPRO16.DLL at 0002:00001568.
Registers:
EAX=00000003 CS=2e77 EIP=00001568 EFLGS=00000202
EBX=00831786 SS=0e7f ESP=00008aec EBP=00008afa
ECX=00010022 DS=2e57 ESI=0000122f FS=122f
EDX=00010e7f ES=0177 EDI=00000177 GS=0000
Bytes at CS:EIP:
c4 1e 8c 00 66 26 ff 77 04 66 26 ff 77 08 90 0e
Stack dump:
122f0177 00000003 bff7280f 8b510177 01a70028 00000003 bff77716 00000000 00730000 bffc9490 bff7ea17 bffc9490 0083fb4c 8173e7d4 81731334 bff741f7
please help me someone!!!!after i reboot i will play for a lil bit but just to have it shut down on me again.please help.

Author:  Baker [ Sun Oct 02, 2005 7:50 pm ]
Post subject: 

What graphics card are you using ? This is important when looking into this kind of problem.

Start --> Control Panel --> Display --> Settings Tab ---> It shows your video card

Image

Author:  gamefreak [ Fri Oct 07, 2005 11:17 pm ]
Post subject: 

it says SiS 6362 baker

Author:  Baker [ Sat Oct 08, 2005 1:46 am ]
Post subject: 

I don't think that is a graphics card that supports GL Quake.

Are you able to use GLQuake or do you just use WinQuake?

Author:  gamefreak [ Sat Oct 08, 2005 2:48 am ]
Post subject: 

i use all kinds.fvf,win,joe,and winpro.

Author:  Baker [ Sat Oct 08, 2005 3:27 am ]
Post subject: 

WinQuake doesn't use Open GL to render graphics.

WinQuake, wqpro.exe (Win ProQuake) and joequake.exe are all non-Open GL.

GLQuake, glpro.exe, joequake-gl.exe all use OpenGL. Have you successfully used either glquake.exe or glpro.exe ?

I suspect you probably are not using a OpenGL compatible graphics card or at least want to make sure that you are. joequake-gl.exe won't work on a card that doesn't support Open GL.

Examples of Open GL supporting graphics cards: Radeon and GeForce and older cards like Voodoo, TNT, etc.

Author:  aguirRe [ Sat Oct 08, 2005 5:00 am ]
Post subject: 

Since the crash is in pmpro16.dll, it's a software engine he's using, e.g. WinQuake or JoeQuake non-GL. So the error is not related to any OpenGL stuff but more basic 2D rendering including some DirectX sounds. I'd say try different video drivers, either older or newer for that card.

I also have an enhanced WinQuake variant that you could try: http://user.tninet.se/~xir870k.

Author:  gamefreak [ Sat Oct 08, 2005 9:01 am ]
Post subject: 

too..much...techno...talk..cant..think...straight..cant...stop...talking..like...this.

Author:  Baker [ Sat Oct 08, 2005 10:59 am ]
Post subject: 

Gamefreak, If you are using Win JoeQuake (joequake.exe) and NOT the GL Version with the cool graphics (joequake-gl.exe), you might stick with what doesn't get illegal operations = whatever you were using before because you won't notice the difference playing multiplayer

(Thx for clearing up what he was using Aguire).

Author:  gamefreak [ Sat Oct 08, 2005 11:17 am ]
Post subject: 

for some reason today its not shutting off on me.it does do that sometimes.

Author:  Baker [ Sat Oct 08, 2005 12:08 pm ]
Post subject: 

At least it's working now :)

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/